INOV8

Bare-XF Pro Mens

INOV8

Bare-XF Pro Mens

$259.99
Item is in stockHurry! Low inventoryItem is out of stock Item is unavailable
Fit (Width)
Colour
Size (US - Mens)
Quantity
FREE SHIPPING ON ORDERS OVER $200

Protective & hardwearing minimalist gym shoe. Features a natural sock-like fit and a KPU cupped heel for stability when lifting

Fit Guide

12345
Small Fit
Average Fit
Generous Fit
Gym
0 mm
Gym
Barefoot Training
INOV8 Rubber
BOOMERANG Footbed
250 g

To maximise the life of your gym shoes, make sure you dry them fully after every workout. You should clean them periodically too, to maintain the breathability of the shoe’s upper.

Washing: 
For best results, hand-wash your shoes as close to the end of your workout as possible. To wash your shoes:

  • Remove the insoles and loosen or remove the laces.
  • Rinse your shoes under cold running water while brushing off any dirt (an old toothbrush is perfect for this).
  • For stubborn dirt, grime and odours we recommend using Grangers® Footwear & Gear Cleaner spray to clean and refresh your shoes.

Drying:
Place your shoes in a warm room, an airing cupboard or outside (but not in direct sunlight) to dry. Do not dry your shoes in a tumble dryer or next to radiators, fireplaces or hot summer sunlight.

You can speed up the drying process by removing the shoes’ insoles and shoelaces, and by stuffing them with newspaper.
 
Make sure your shoes are completely dry before wearing again.

Selecting Your INOV8 Shoe Size:

How to measure the length of your foot - and get your size:

You will need a piece of paper that fits your foot and a writing instrument to mark your foot's length. Having someone to help you with this could also be beneficial.

  1. On a hard floor, put a piece of paper against a wall.
  2. Stand on the paper in socks you would normally wear with this type of show.
  3. Ensure the back of your heel is against the wall and that you’re placing your weight evenly on your foot.
  4. Ask someone to make a mark on the paper at the end of your longest toe.
  5. Measure the distance from the edge of the paper that touched the wall where your heel was to the mark at your longest toe. That is the length of your foot.
  6. Repeat this process on your other foot.
  7. It’s common to have one foot bigger than the other, so make sure you measure both feet. Pick your shoe size based on the length of your longer foot.
Shoe Size (US) - Mens Shoe Size (US) - Womens Foot Length (mm)
4 5.5 216
4.5 6 220
5 6.5 225
5.5 7 229
6 7.5 233
6.5 8 237
7 8.5 242
7.5 9 246
8 9.5 250
8.5 10 254
9 10.5 259
9.5 11 263
10 11.5 267
10.5 12 271
11 12.5 275
11.5 13 279
12 13.5 284
12.5 14 288
13 14.5 292
14 15.5 301
15 16.5 305

Selecting Your INOV8 Shoe Width:

How to measure the width of your foot - and get your width:

You will need a piece of paper that fits your foot and a writing instrument to trace your foot's outline. Having someone to help you with this could also be beneficial.

  1. On a hard floor, put a piece of paper against a wall.
  2. Stand on the paper in your socks.
  3. Ensure your heel is against the wall and distribute your weight evenly.
  4. Trace a line around your foot and mark the widest point.
  5. Measure the distance and compare it with the width chart below.

Choose the width based on your widest foot measurement. Use your selected shoe size as your guide.

Shoe Size (US) - Mens Shoe Size (US) - Womens Precision Fit Foot Width (mm) Standard Fit Foot Width (mm) Wide Fit Foot Width (mm)
4 5.5 80 85 90
4.5 6 80 85 90
5 6.5 82 87 92
5.5 7 82 87 92
6 7.5 84 89 94
6.5 8 86 91 96
7 8.5 86 91 96
7.5 9 88 93 98
8 9.5 88 93 98
8.5 10 90 95 100
9 10.5 90 95 100
9.5 11 93 98 103
10 11.5 93 98 103
10.5 12 95 100 105
11 12.5 95 100 105
11.5 13 97 102 107
12 13.5 97 102 107
12.5 14 99 104 109
13 14.5 99 104 109
14 15.5 102 107 112
15 16.5 102 107 112

Shipping Charges

$10 Flat Rate Regular Domestic Shipping.
Free shipping over $200.00
Wholesale orders ship free over $500.00

Order Processing & Dispatch

Orders are packed and dispatched within 2-3 business days.

Returns

We want you to be 100% satisfied with your purchase. If you are not completely satisfied with your online purchase through Endurance Edge, you may return it within 30 days of receipt, and we'll gladly provide a refund.

Returns & exchanges policy

T8 Air Socks - Endurance Edge

Buy It With

T8 Air Socks

$20.00

Quick Buy  
T8 Sherpa Flask - Endurance Edge

Buy It With

Sherpa Flask

From $16.00

Quick Buy  
Trail Cap - Endurance Edge

Buy It With

Trail Cap

$39.00

Quick Buy  
FREE Shipping on Orders Over $200
30 Day Hassle Free Money Back Returns
Buy Direct From Official Australian Distributor
[{"variant_id":"50382828011798" , "metafield_value":""},{"variant_id":"50382827979030" , "metafield_value":""},{"variant_id":"50382828077334" , "metafield_value":""},{"variant_id":"50382828044566" , "metafield_value":""},{"variant_id":"50382828142870" , "metafield_value":""},{"variant_id":"50382828110102" , "metafield_value":""},{"variant_id":"50382828208406" , "metafield_value":""},{"variant_id":"50382828175638" , "metafield_value":""},{"variant_id":"50382827782422" , "metafield_value":""},{"variant_id":"50382827749654" , "metafield_value":""},{"variant_id":"50382827847958" , "metafield_value":""},{"variant_id":"50382827815190" , "metafield_value":""},{"variant_id":"50382827880726" , "metafield_value":""},{"variant_id":"50382827913494" , "metafield_value":""},{"variant_id":"50382827946262" , "metafield_value":""}]
Bare-XF Pro Mens Technical Details

Fit:

  • Wide

Footbed:

  • BOOMERANG Footbed

Lugdepth:

  • 0 mm

Midsole:

  • No Midsole = More Natural Feel

Midsole Stack:

  • 0mm Heel / 0mm Forefoot

Shank:

Sole Compound:

  • INOV8 Rubber

Vegan?

  • Yes
The Features You Will Really Love About The

Bare-XF Pro Mens

The top bragworthy features

1. Grippy Rubber Outsole

Keep your footing with our 2.5mm thick grippy rubber outsole. Lightweight grip for any gym-based exercise, including weightlifting, cardio, functional movements, walking and running.

2. No Midsole = More Natural Feel:

Feel the ground beneath you. A close to the ground design gives you a more natural/barefoot feel. Most gym shoes have a thick wedge of midsole foam to cushion impacts. The BARE-XF™ PRO does away with this to enhance spatial awareness and control of your feet.

3. Protective Features

The BARE-XF™ PRO benefits from a number of protective features, while still retaining that natural feel. A toe bumper guards against painful stubs during exercises such as burpees. A KPU cupped heel gives you better stability when lifting. And a KPU Adapterweb overlay gives the shoe more structural support and protection too.

4. Sock-Like Fit

Constructed using the sachetto method – a premium technique usually reserved for leather lined shoes – the BARE-XF™ PRO benefits from a seamless interior, as the seam is turned outwards. There is no insole in the shoe, courtesy of the BARE-XF™ PRO’s comfortable inner sock, which is stitched directly to the upper. Coupled with a stretch knit tongue and collar, the shoe is extremely comfortable and flexible - exactly the fit you want with a minimalist training shoe.

5. ROPE-TEC

Protection and durability during rope climbs. ROPE-TEC technology embedded into the midsection of the outsole and around the arch of the foot gives protection from friction on rope climbs, and delivers increased durability.

INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_All.png
INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_1.png
INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_2.png
INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_3.png
INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_4.png
INOV8_Bare-XF_Pro_Mens_Black_Gum_Features_Image_5.png

The Bare-XF Pro Mens

Nitty Gritty Details

Hardwearing, protective minimalist gym shoes that let your feet do the walking – meet the BARE-XF™ PRO. These premium, high performance barefoot shoes comfortable and highly flexible, but at the same time are packed with protective features to allow you to perform at your best.

Constructed using premium techniques, the BARE-XF™ PRO benefits from a fully seamless interior and an inner sock that’s attached to the upper. This sock-like fit, together with the absence of a midsole, gives you that natural, close-to-the-ground feel. This premium construction also doesn’t compromise on comfort – these are shoes you can wear all day long, whether inside or outside of the gym. We’ve designed the BARE-XF™ PRO for those who want to tackle hardcore workouts as naturally as possible.

Alongside our renowned sticky rubber grip, the shoe gives you protection where you need it most. A KPU cupped heel provides you with better stability when lifting heavy, and a KPU Adapterweb overlay also gives additional structural support and protection for your foot. There’s also a toe bumper to guard against painful stubs when performing burpees, and ROPE-TEC technology is integrated at the lateral and medial arch for protection during rope climbs. The extremely durable BARE-XF™ PRO gives your feet the protection they need, while not compromising natural performance.

These premium, high-performance barefoot shoes are comfortable and highly flexible, but at the same time are packed with protective features to allow you to perform at your best.

Why Inov8 shoes?

NATURALFIT™

Innovative footwear to unlock your full, natural potential

“Our new design and fit ensures the foot controls the shoe, not the other way round. It's as nature intended”
- Wayne Edy, INOV8 founder

  • Gain true underfoot connection through grip, ground feel and agility.

  • Push with confidence and move freely while adapting to all challenges.

  • Get lightweight cushioning and protection that support a faster, natural feel.

  • Dig deeper with enhanced natural comfort for longer-lasting foot health.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)